RPE-120 PCI Express Netlogic XLP 8xx Packet Processor Card

The JumpGen Systems RPE-110 PCIe Netlogic XLP 8xx Packet Processor Card is a high-performance network processor PCI Express card designed for use in PCI Express compliant systems. It features the latest NetLogic XLP8xx series processors with up to 1.2GHz core frequency. The RPE-120 can be delivered with up to 16GB of quad-channel 72-bit wide DDR3 ECC memory running at 1600MT/s.

Four SFP/SFP+ interfaces, each individually configurable for 1GigE SFP or 10GigE SFP+, are provided on the front panel. In addition, an expansion mezzanine with high-speed Inter-Chip Interconnect (ICI) and PCI Express Gen2 (or Interlaken-LA) connections to the XLP8xx processor allows for additional on-board processing. Refer to the block diagram for details.

Download Product Brief PDF version

Features:

Network Processing Units (NPUs)	NetLogic XLP816, or XLP832 4-8 cores – each quad-issue, 4-way simultaneous multi-threaded 64-bit MIPS64 Release-II ISA with enhanced instructions 64KB L1-I Cache per core 32KB L2-D Cache per core 512KB L2 Cache per core Up to 8MB L3 Cache (shared) Out-of-order processing IEEE754-compliant floating point unit per core 800 MHz – 1.2 GHz core frequency Accelerators Engines Up to 40Gbps bulk encryption/decryption Up to 30K RSA key exchanges per second Keys up to 8192 bits in length supported Up to 10Gbps bulk compression/decompression RAID 5/6 Accelerator IEEE1588v2 PTP controller Inter-Chip Interface (ICI) supporting up to 80Gbps PCI Express Gen 2 and Interlaken-LA Interfaces
Memory	Up to 16GB of DDR3 memory w/ ECC on quad-channel x72 bus DDR3 clock rate up to 1600MT/s
I/O Capabilities	Four front panel SFP/SFP+ 1/10GigE sites Each site configurable individually for 1G SFP or 10G SFP+ operation PCI Express Gen 2 x8 to base board RS-232 serial port (internally accessible only) for development and debugging
Mezzanine	Mezzanine to support FPGA, NETL7 or other accelerator content Approximately 3.5” by 3.25” space available for custom mezzanine cards PCI Express Gen 2 x8 to XLP8xx Interlaken-LA available as an alternative to PCI Express Build-time configuration option Mezzanine selects endpoint or root complex Inter-Chip Interconnect (ICI) to XLP8xx, allowing direct access to XLP memory and resources Pinout and Mechanical Specifications for Mezzanine available to enable customers to design new mezzanine cards
Software	NetLogic Microsystems XLP SDK Linux Distribution Lightweight fast path executive Debug and development tools Example software and benchmark code Other Linux distributions supported, contact your sales representative for details
Mechanical and Environmental	Standard single-slot PCI Express card form factor Full Length Full Height Single or Dual Slot, depending on mezzanine Operating temperature range: 0 to 35°C ambient, assuming 20°C rise inside chassis Humidity: 0 to 95% (non-condensing) Typical power consumption: 20-150W, depending on XLP8xx and speed selection, and mezzanine
Regulatory	Designed and manufactured to meet the following requirements FCC Class A CE IEC 60950 NEBS Level 3 Company will get certifications as required to meet specific customer requirements

Block Diagram: