R4M-100 AMC Netlogic XLS Quad Core Packet Processor Card

JumpGen R4M-100 AMC RMI XLS Packet Processor Card The JumpGen Systems R4M-100 AMC Netlogic XLS Packet Processor Card is a high-performance network processor AdvancedMC™ (PrAMC) card designed for use in ATCA or MicroTCA systems. Featuring the latest Netlogic (RMI) XLS416 quad core processor with up to a 1.2GHz clock rate, the R4M-100 can be delivered with up to 8GB of 72-bit wide DDR2 ECC memory running at 800 MHz. The Netlogic XLS416 is a multi-core, multi-threaded MIPS64® processor with a rich set of Integrated I/O. The R4M-100 is compliant with PICMG AMC.0 Revision 2.0 Mid-Size or Full-Size form factor standards.

The Netlogic XLS416 also provides up to 2.5 Gbps of bulk encryption plus RSA and 2.5 Gbps Compression/Decompression via integrated security acceleration and compression/decompression engines available on the XLS416. The R4M-100 is ideal for security applications in wireless and wireline access points, switches and routers, radio network controllers, media gateways and video processing applications.

The R4M-100 will support the following configuration build options:

  1. Processor Options
    1. 1.2GHz XLS416 with 800MHz DDR2, or
    2. 1.0GHz XLS416 with 667MHz DDR2, or
    3. 800MHz XLS416 with 533MHz DDR2.
  2. I/O Options
    1. Front Panel via AMC - 4 RJ-45s in Quad Assembly on AMC Front Panel Supporting 10/100/1000BaseT or
    2. Rear I/O Support via RTM - 4 1000Base-BX Ports to lanes 17-20 for ATCA carriers that route lanes 17-20 to RTM
  3. Fatpipes Interface
    1. PCIe – x4 (lanes 4-7) or x1 (lane 4 or
    2. SRIO – x4 (lanes 4-7) or x1 (lane 4)

Download Product Brief PDF version

Features:

Central Processing Units
(CPUs)
  • RMI XLS 416 Processor Family featuring Four 64 bit Processing Cores
    • Up to 1.2 GHz with 1MB L2 cache
    • Up to 8GB of DDR2 memory w/ ECC on x72 bus
    • Autonomous Security Acceleration Engine® (SAE) @ 2.5 Gbps
    • Compression/Decompression Engine @ 2.5 Gbps
    • Network Hardware Acceleration with IEEE1588-compliant Precision Timing Protocol (PTP) Controller
I/O Capabilities
  • AMC.2 Dual 1000Base-BX Ports configured as Type E2 (Lanes 0, 1)
  • AMC.2 Dual 1000Base-BX Ports configured as Type 2 (Lanes 8, 9)
  • Quad (4) Dual 10/100/1000Base-T Ports on Front Panel (RJ45) or
      Quad (4) 1000Base-BX Ports to lanes 17-20 on AMC Connector for Rear RTM I/O Support
  • AMC.1 PCIe Type 4 (Lanes 4-7) or Type 1 (Lane 4) or a build option
      for AMC.4 SRIO (Lanes 4-7) or Type 1 (Lane 4)
Mass Storage
  • Dual Redundant Soldered 256MB NANDFlash
Boot Support
  • Boot from NANDFlash or
  • Network boot (GigE ports)
  • Serial Console (via header only)
Clocks
  • PCIe Clock Input on AMC Connector – CLK3/FCLKA
  • Telco Clock Input on AMC Connector – TCLKA differential pair input converted to single ended connection to XLS416
Mechanical
  • Standard AMC Full-Size or Mid-Size form factor
LEDs
  • Blue Hot Swap, Green Card Status and Red Out of Service Per AMC specification
  • Each RJ-45 has integrated Green Link and Yellow Activity LEDs
Environmental
  • Operating temperature range: 0 to 55 °C
  • Humidity: 0 to 95% (non-condensing)
  • Typical power consumption: 38W
  • Worst-case power consumption: 44W

Block Diagram:

R4M-100 Block Diagram