R4M-100 Broadcom XLS Quad Core Packet PrAMC Card

The JumpGen Systems R4M-100 AMC Broadcom XLS Packet Processor Card is a high-performance network processor AdvancedMC™ (PrAMC) card designed for use in ATCA or MicroTCA systems. Featuring the latest Broadcom XLS416 quad core processor with up to a 1.2GHz clock rate, the R4M-100 can be delivered with up to 8GB of 72-bit wide DDR2 ECC memory running at 800 MHz. The Broadcom XLS416 is a multi-core, multi-threaded MIPS64® processor with a rich set of Integrated I/O. The R4M-100 is compliant with PICMG AMC.0 Revision 2.0 Mid-Size or Full-Size form factor standards.

The Broadcom XLS416 also provides up to 2.5 Gbps of bulk encryption plus RSA and 2.5 Gbps Compression/Decompression via integrated security acceleration and compression/decompression engines available on the XLS416. The R4M-100 is ideal for security applications in wireless and wireline access points, switches and routers, radio network controllers, media gateways and video processing applications.

The 6WINDGate™ packet processing framework is available for this card.

The R4M-100 will support the following configuration build options:

1. Processor Options
   1. 1.2GHz XLS416 with 800MHz DDR2, or
   2. 1.0GHz XLS416 with 667MHz DDR2, or
   3. 800MHz XLS416 with 533MHz DDR2.
2. I/O Options
   1. Front Panel via AMC - 4 RJ-45s in Quad Assembly on AMC Front Panel Supporting 10/100/1000BaseT or
   2. Rear I/O Support via RTM - 4 1000Base-BX Ports to lanes 17-20 for ATCA carriers that route lanes 17-20 to RTM
3. Fatpipes Interface
   1. PCIe – x4 (lanes 4-7) or x1 (lane 4) or
   2. SRIO – x4 (lanes 4-7) or x1 (lane 4)

Download Product Brief PDF version

Features:

Central Processing Units (CPUs)	Broadcom XLS 416 Processor Family featuring Four 64 bit Processing Cores Up to 1.2 GHz with 1MB L2 cache Up to 8GB of DDR2 memory w/ ECC on x72 bus Autonomous Security Acceleration Engine® (SAE) @ 2.5 Gbps Compression/Decompression Engine @ 2.5 Gbps Network Hardware Acceleration with IEEE1588-compliant Precision Timing Protocol (PTP) Controller
I/O Capabilities	AMC.2 Dual 1000Base-BX Ports configured as Type E2 (Lanes 0, 1) AMC.2 Dual 1000Base-BX Ports configured as Type 2 (Lanes 8, 9) Quad (4) Dual 10/100/1000Base-T Ports on Front Panel (RJ45) or   Quad (4) 1000Base-BX Ports to lanes 17-20 on AMC Connector for Rear RTM I/O Support AMC.1 PCIe Type 4 (Lanes 4-7) or Type 1 (Lane 4) or a build option   for AMC.4 SRIO (Lanes 4-7) or Type 1 (Lane 4)
Mass Storage	Dual Redundant Soldered 256MB NANDFlash
Boot Support	Boot from NANDFlash or Network boot (GigE ports) Serial Console (via header only)
Clocks	PCIe Clock Input on AMC Connector – CLK3/FCLKA Telco Clock Input on AMC Connector – TCLKA differential pair input converted to single ended connection to XLS416
Mechanical	Standard AMC Full-Size or Mid-Size form factor
LEDs	Blue Hot Swap, Green Card Status and Red Out of Service Per AMC specification Each RJ-45 has integrated Green Link and Yellow Activity LEDs
Environmental	Operating temperature range: 0 to 55 °C Humidity: 0 to 95% (non-condensing) Typical power consumption: 38W Worst-case power consumption: 44W
Regulatory	Designed and manufactured to meet the following requirements FCC Class A CE IEC 60950 NEBS Level 3 Company will get certifications as required to meet specific customer requirements

Block Diagram: