RPE-122 PCI Express Broadcom XLP 432 Accelerator Card

The JumpGen Systems RPE-122 Accelerator Card is a high-performance network processor PCI Express card designed for use in PCI Express compliant systems. It features the latest Broadcom XLP4xx series processors with up to 1.2GHz core frequency. The RPE-122 can be delivered with up to 32GB of quad-channel 72-bit wide DDR3 ECC memory running at up to 1600MT/s. Four SFP/SFP+ interfaces, each individually configurable for 1GigE SFP or 10GigE SFP+, are provided on the front panel. A Micro-SD Card Slot is provided for storage. A RS-232 Com port is provided on the front panel. This port requires a custom cable provided by JumpGen Systems. Refer to the block diagram for detail.

Download Product Brief


Network Processing Units
  • Broadcom XLP408, XLP416, or XLP432
    • 2-8 cores – each quad-issue, 4-way simultaneous multi-threaded
    • 64-bit MIPS64 Release-II ISA with enhanced instructions
    • 64KB L1-I Cache per core
    • 32KB L2-D Cache per core
    • 512KB L2 Cache per core
    • Up to 8MB L3 Cache (shared)
    • Out-of-order processing
    • IEEE754-compliant floating point unit per core
    • 800 MHz – 1.2 GHz core frequency
  • Accelerators Engines
    • Up to 40Gbps bulk encryption/decryption
    • Up to 30K RSA key exchanges per second
    • Up to 10Gbps bulk compression/decompression
  • IEEE1588v2 PTP controller
  • Up to 32GB of DDR3 memory w/ ECC on quad-channel x72 bus populated with miniDimm VLP in PC3-10600 or PC3-12800 compliance. 667 or 800MHz clock rate for up to 1600MT/s
  • A Micro SD Card Slot is provided for storage
I/O Capabilities
  • Four front panel SFP/SFP+ 1/10GigE sites
    • Each site configurable individually for 1G SFP or 10G SFP+ operation
    • • External PHY provides full optic fiber range including LRM capability
  • PCI Express Gen 2 x8 to host
  • RS-232 Com Port on front panel
  • USB-Mini Com Port internal
  • Broadcom Microsystems XLP SDK
    • Linux Distribution
    • Lightweight fast path executive
    • Debug and development tools
    • Example software and benchmark code
  • Other Linux distributions supported, contact your sales representative for details
Mechanical and Environmental
  • Standard PCI Express card form factor
    • length 217.65mm ( half length plus 50 mm)
    • dual slot height 32mm [utilizing PCIe slot + slot above for active cooling solution]
  • Operating temperature range: 0 to 35°C ambient, assuming 20°C rise inside chassis
  • Humidity: 0 to 95% (non-condensing)
  • Typical power consumption: 60-135W, depending on XLP4xx and speed selection, and memory configuration
  • Designed and manufactured to meet the following requirements
    • FCC Class A / CE / IEC 60950 / NEBS Level 1
  • Company will get certifications as required to meet specific customer requirements

Block Diagram

Broadcom XLP432 pcie accelerator card